How to clean GEORGE?

The frequency of cleaning GEORGE depends mainly on the hardness of the water used. We recommend that you open the appliance, look inside and descale it if necessary.

• Every week: wash the water tray and the disc set with clean water to remove impurities.
• Every 2 weeks: thoroughly clean the water tray, the disc set and the tank with a soft brush or sponge and hot water. If there is limescale deposit in the water tank or reservoir, use the descaling solution Cleaner&Descaler diluted in water (follow the instructions for dosage). After descaling, the base and reservoir must be rinsed thoroughly with tap water. Unlike the tank, the water base can also be cleaned in the dishwasher (max. 60¬∞C).

In the event of significant scaling, we recommend using the cleaning mode of the air washer. To do this, pour the Cleaner & Descaler descaling solution into the water tank and pour in the same amount of tap water. Then replace the water base with the disc set. To activate the cleaning mode, you must hold down the 2 buttons «SPEED» and «DIMMER» simultaneously until the white LEDs flash. This indicates that the discs are rotating, but not the fan, which prevents the cleaning agent from being released into the ambient air. After 20 minutes, GEORGE is cleaned and the LEDs turn off. Be sure to rinse all cleaned parts thoroughly with clean water. If there is still limescale in the device, repeat the cleaning.