Humidifier GOTAKID

If your humidifier is scaled, we simply recommend using white vinegar and water. Dilute the vinegar in 50% to 60% water, leave for 10 to 20 minutes and rinse. Be careful not to rinse with too much water, as this could introduce water into the electronic part (which would damage your device). You can also use specialized products, such as Cleaner&Descaler from Stadler Form.

With an ultrasonic humidifier, the steam is diffused into the room by means of a small fan whose air inlet is, in most cases, located under the device. It is therefore necessary to check that nothing is blocking this air inlet. For example, avoid placing the device on a carpet, rug or cloth. In addition, be sure to check the temperature of the room: if it is too cold, the steam from your humidifier will fall around the device. It is therefore necessary to move it closer to a heat source or place it a little higher. Finally, we advise you to lower the power of the steam.

The air inlet, usually located under the appliance, is blocked by dust or the appliance is placed on a carpet or rug. Our advice: place the appliance on a flat, smooth surface.

It is not possible to diffuse oils in your ultrasonic humidifier. The base of the device is made of ABS, the presence of oils in the water will corrode the ABS and your device will leak. Be careful, in this case, your product is no longer under warranty.

Frequent use of a humidifier requires regular and careful maintenance, at least once a week if you use it very often.

To clean it, use white vinegar: in addition to being economical, it is the ideal product for eliminating limescale. There are also specific maintenance products, such as the Stadler Form cleaner and descaler Cleaner&Descaler which effectively preserves materials.

We recommend filling the tank with vinegar and water, then leaving it to act for 30 minutes before rinsing it. Just be sure to unplug it first and not wet the electronic components so as not to damage them and put yourself in danger.

In the case of an ultrasonic humidifier, clean the metal plate with a soft brush.

Finally, do not let water stagnate for more than 72 hours in the device to avoid any proliferation of bacteria.

This is a patented technology by air&me that allows easy use of the humidifier. In fact, it controls the start and stop of the device automatically, depending on the ambient humidity level. It allows regulation of the hygrometry, so that it is between 40% and 60%, which is the recommended humidity level. This function can be deactivated.

GOTAKID is equipped with a night light that helps your child fall asleep. Its childish design makes it a warm companion for your child, who can personalize it with several stickers. In addition, the device emits cold steam, so there is no risk of burns. This humidifier is ideal during the winter season because it helps relieve babies and children from bronchiolitis.

It is a patented technology by air&me that allows automatic regulation of the humidity level. Once the function is activated, the device works automatically to reach the right humidity level between 48% and 53%.